Gaslands in 6MM – out of sight but not out of mind

GASLANDS IN 6MM

img_3928.jpg

Some time ago I was writing a few blog entries about doing Gaslands in 6mm and then it went quiet – we actually have played a fair few games and really enjoy it.

Anyway a little bit of summary of where we are at with this:

  1. Overview
  2. Games we have played on our Toxic Track
  3. Using Dropzone commander terrain
  4. Further ideas – Snowmobiles and Zombies

As I have said before I am not in a position to have a permanent set-up so prefer to do some of the games I play on smaller surfaces (say a maximum of 3 by 4 feet), so games like X-wing or Saga are great straight from the box.  Another way to achieve this is to convert a bigger scale game (e.g.28mm) from inches to centimeters (1″ becomes 1 cm) or by using half inches (1″ becomes 1/2″ or 1.27cm – not that difficult if you make special measuring sticks – a one time investment in time) – and using smaller scales for the miniatures. I did this for the Dan Mersey series of rules (e.g. here and here) and for Too Fat Lardies Sharp Practice (e.g. here) and it does work.  Yes it is a little bit more fiddly.

My original thoughts on doing Gaslands in 6mm – well actually more than thoughts – can be found summarised in a blog post I wrote earlier (Here).  After this I got myself some 50% movement templates that I bought from Bendyboards (link here, contact Lee and ask him for 50% if this is of interest) that produces the official Gaslands templates.  This in effect means that a 2 by 2 foot board equates to a 4 by 4 in full scale.

 If you want a good overview of the game, I think this review (link here) is a good summary and worth reading instead of me repeating something similar in content but less enjoyable and thorough.  I agree with the sentiment of this review.

TERRAIN FOR PLAYING THE GAME

Getting toxic

So far we have used the Toxic track I made some time ago to do our games, we played a fair few games just using a car each with front mounted machine gun, but we have now also done some games with 3 to 5 vehicles on each side.  I find that it produces different games – the single car race is about outmaneuvering and skill whilst the selection of vehicles tends to lead to a more skirmish fight situation – at least the way the Little One and I are playing.  Both version highly enjoyable.

Here is the terrain board again (2 by 2 feet) – we are ready to press the pedals very quickly with 2 minutes of so set-up time.

gaslands3.jpg

It has some slimy pits that are best left alone.

gaslands1gaslands2gaslands4gaslands5gaslands6

Here are a few shots from some of the games we have played.

gaslands7gaslands8gaslands9gaslands10gaslands11gaslands12gaslands13gaslands14gaslands15gaslands16gaslands17gaslands18

dropzone commander ruined city tiles

I actually came to the conclusion that the cars I ended up getting were probably closer to 10mm than 6mm scale – instead of 1/285 scale I found them being more like 1/200.  10mm normally is referred to as 1/160.   I then remembered the Dropzone commander rules and some cityscape terrain I had seen that looked decent – at least from what I was seeing.   I ordered a set of ruined city tiles and buildings for the Dropzone commander game.  It is a card board set in 10mm scale and I think this will work brilliantly as it may portray a section of a city where the level of radiation is too high for permanent inhabitation, or otherwise abandoned, and is now being used for Gaslands competitions.

You can find more information about it here.  It comes with 20 buildings and mats to cover 6 by 4 feet, so more than plenty for our needs. At £20 (reduced at the time I bought it 3rd April 2018, from £30) for the whole set (including delivery in the UK), hardly any significant outlay even if it is cardboard and we will probably end up knocking down the buildings whilst maneuvering our cars – but I will keep you posted on how this cardboard adventure will progress.

large.jpg
Here is the full set as presented on the Webpage. Looks ok I would use some model trees for the park but otherwise good to go.  It is recommended that you mount the tiles on some sturdier board.

Here are some shots showing how the cars I am using compare in relation to the terrain.  I think it is a more than adequate fit and I think this terrain have some potential for a lot of different things.

 

gaslands19
Really like this
gaslands20
Spot on

 

In addition you can download more buildings for free on the webpage (here), but I think I will stick to these pre-printed ones as I am happy with the amount of terrain I already have in the basic set.  I suppose if you use these you could re-sixe them to fit to the scale you are using.

print.JPG
Example of a printable free building for Dropzone Commander as the link above.

further gasland ideas

mutant 1984

I recently completed some Snowmobiles for my Mutant 1984 project, based on a matchbox model (“Snow Hopper”). I found these at a Poundshop for £1 each.

These are in “28mm” and I am planning on using Gaslands for a chase scene with some skiers, snowmobiles and some other snow vehicles, like the one in the picture below from Warlord Games – the Gaz 98 Aerosan (link here, picture from their webpage) and the skiers (link here, picture from their webpage). Still work in progress, so some time away from completion.  It is basically a “downhillish” race where a detachment of Pyri Commonwealth Scouts on skis are being spotted by some Borderguards of the Ulvriket Army on Patrol in the occupied Göinge during the cold Winter Year 109.

wgb-ri-121-aerosan-a_grande.jpg

 

thJH2TJQIB.jpg

6MM ZombieS

I also have some 6mm zombies that I need to paint to do the zombie scenario for my “6mm” cars, these are from Microworld Miniatures and I will be using Zombies and Ghouls (link to Microworlds Undead Range, here. Pictures from their Webpage).

ghoul1_grandezombies1_large

In summary we are having fun with these rules!, I hope you are too.

Next time is the 100th Roll a One blog entry.

/All the best, and by the way we had a guest font in this blog post it is called 28 days later and used in Gaslands – you can download it here.

 

 

2 thoughts on “Gaslands in 6MM – out of sight but not out of mind

  1. Az from Azarus

    Hi there!

    I was thinking the se thing since I have a loooot of 6mm minis, glad to see that someone actually did it, this might motivate me to actually finish the project (and a 2’x2′ board is something that I can quite quickly finish). Since the originall scale is 1:64 isint scaling down to 50% still to large? Where did you get the cars from :)?

    Liked by 1 person

    1. On the scale, I find that the 50% reduction works fine for the vehicles I am using. There is a discussion on the vehicles I have been using here – https://rollaone.com/2017/11/29/i-am-just-here-for-the-gasoline-initial-thoughts-on-gaslands-in-6mm-and-some-notes-on-vehicles/ (paste in in your browser if it does not work). Note that there are some differences between manufacturers and within ranges from the same manufacturer. I suggest you download the templates from the Gasland site and try out what reduction in size works for you. Do not worry about the actual scale difference too much and you will have a blast. In summary if you are in the UK buy the Irregular Miniature vehicles to start with, if you are in the UK by the Wave 1 or Wave 2 vehicles from Microworld to start with, if you are based elsewhere have your pick. I got them all and in addition the stuff from Vanguard is brilliant. There is also a discussion here on using some cheap stuff from China – https://rollaone.com/2017/12/31/bonus-blog-post-filler-cars-for-gaslands-in-6mm/ . All the best thanks for popping in / Per

      Like

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s