One of the scenarios I am envisaging for the “What if”German Invasion of Sweden 1943 project I am working on is a river crossing over the Dalecarlian River (Dalälven) – as it is such a central feature of the county.

I did some rubber boats earlier that you can find in the link ( German Infantry Platoon(s) for the What-if attack of Sweden in 1943 , this link also contains a high-level painting guide I used for the German in this this campaign) but wanted to support this with some boats with engines.

The German army used the Leichtes Sturmboot 39 that were small high-powered assuault boats with by an 30 HP “Powered oar” outboard motor, they were used for river and small waterway assaults, crossings and to push pontoon boats. They were mainly used by Engineering typically to form a bridge head to build a pontoon bridge. Below is a small video showing them in use from Youtube.

I made a few improvised boats that I wrote about in an earlier blog for my Continuation War Finns.

Finnish Assault Boats for Chain of Command

Anyway the new ones are based on the actual boats and 3d printed. You can buy the files from 3D wargaming here. You can print out two versions one is an uncovered version (open boat, as can be seen in the video above) I believe the covered versions were used by the Marine. Well in my 1943 campaign they came from some marine units in Norway just before the invasion. I also have some uncovered ones that I will use to “redo” the Finnish ones I showed above. I asked Paul Edwards at Sabotag3d (https://www.sabotag3d.com/) to print them out in 1/100 or 15mm scale.

As for the crew I used some Germans from the lead mountain – yes mine is substantial. For the “drivers” I used pointing NCO or artillery models and for the others a selection of different infantry types. As the models are close together pay attention to helmet size as they tend to vary between manufacturers and can look strange next to each other. I cut most of the bases off and also the feet or parts of the legs to make some interesting positions. In reality the were probably less obvious targets when crossing in them but I think you agree that it looks nice and dramatic in the pictures below.

I added a base to them and painted the boats in a dark and light grey, most pictures indicate this type of camouflage pattern being used. I tried to create some effect of water and some foam by painting the bases dark blue, the drybrushed with a medium blue before adding some vallejo Atlantic water effet, finally I paintes some white to represent the foam. Here are the finalised pieces, I am really happy with them.

/Hope that was of some interest